Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Transfer/4wd/Awd
Model Year: 2008 Model: Sequoia Doc ID: RM0000030J2007X
Title: JF3A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH

(a) Remove the front door scuff plate RH ( INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+ ).

HINT:

Use the same procedures described for the LH side.

2. REMOVE COWL SIDE TRIM BOARD RH

(a) Remove the front door scuff plate RH ( INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+ ).

HINT:

Use the same procedures described for the LH side.

3. REMOVE INSTRUMENT SIDE PANEL RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

5. REMOVE 4WD CONTROL ECU

(a) Disconnect the 2 4WD control ECU connectors.

(b) Remove the bolt and 4WD control ECU.